AEL66713 (and oversizes up to .040) - General Aviation Guide, Valve, Intake for General Aviation

AEL66713 (and oversizes up to .040) is a FAA-PMA general aviation guide, valve, intake manufactured by Continental Motors Inc for the General Aviation. This pneumatic systems part supports bleed air distribution and pneumatic actuation and is available with full traceability documentation including FAA 8130-3 airworthiness certification.

Part Number
AEL66713 (and oversizes up to .040)
Manufacturer
Continental Motors Inc
Aircraft Model
General Aviation
Category
Pneumatic Systems
Condition
New
Certification
FAA-PMA
Price
Contact us for pricing
Availability
In Stock
Warranty
As per manufacturer
Request a Quote for AEL66713 (and oversizes up to .040)

About the AEL66713 (and oversizes up to .040) for General Aviation

The General Aviation Guide, Valve, Intake (Part Number: AEL66713 (and oversizes up to .040)) is a pneumatic systems used on the General Aviation. Manufactured by Continental Motors Inc, this component supports bleed air distribution and pneumatic actuation and may be required during maintenance, repair, or scheduled overhaul cycles depending on service intervals and configuration.

Availability may vary across global suppliers and can typically be sourced in one or more of the following conditions:

  • New
  • Overhauled
  • Serviceable / As-Removed

Certification documentation such as FAA 8130-3 or EASA Form 1 may be available depending on supplier and condition.

Alternative and Cross-Reference Parts for AEL66713 (and oversizes up to .040) on General Aviation

The following parts from other manufacturers may serve as alternatives or cross-references for the AEL66713 (and oversizes up to .040) on the General Aviation. Verify interchangeability against the aircraft IPC and Type Certificate Data Sheet before procurement.

Part NumberDescriptionManufacturerCertification
AEL 13622 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision.General Aviation Valve, IntakeAirmotive Engineering CorpFAA-PMA
AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision.General Aviation Valve, IntakeAirmotive Engineering CorpFAA-PMA
EL62388General Aviation Cap, Valve Stem, IntakeAirmotive Engineering CorpFAA-PMA
AEL11901General Aviation Valve, IntakeContinental Aerospace Technologies IncFAA-PMA
AEL11956 (and oversizes up to .040”)General Aviation Guide, IntakeContinental Aerospace Technologies IncFAA-PMA
AEL11900 (and oversizes up to .040”)General Aviation Seat, IntakeContinental Aerospace Technologies IncFAA-PMA

Frequently Asked Questions about AEL66713 (and oversizes up to .040)

Is AEL66713 (and oversizes up to .040) compatible with all General Aviation configurations?
Compatibility depends on aircraft serial number, modification status, and configuration. Verification against maintenance documentation is recommended prior to procurement.
Is AEL66713 (and oversizes up to .040) available new or overhauled?
Depending on availability, this component may be sourced new, overhauled, or serviceable with appropriate documentation.
Do you provide certification paperwork for AEL66713 (and oversizes up to .040)?
Certification documentation such as FAA 8130-3 or EASA Form 1 may be available based on supplier inventory and condition.
How long does sourcing AEL66713 (and oversizes up to .040) take?
RFQ responses are typically returned within 12–24 hours depending on global supplier availability.
Do you ship AEL66713 (and oversizes up to .040) internationally?
Yes. Global shipping and export coordination may be supported depending on supplier location and compliance requirements.

Related Pneumatic Systems Parts for General Aviation