AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. - General Aviation Valve, Intake for General Aviation

AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. is a FAA-PMA general aviation valve, intake manufactured by Airmotive Engineering Corp for the General Aviation. This pneumatic systems part supports bleed air distribution and pneumatic actuation and is available with full traceability documentation including FAA 8130-3 airworthiness certification.

Part Number
AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision.
Manufacturer
Airmotive Engineering Corp
Aircraft Model
General Aviation
Category
Pneumatic Systems
Condition
New
Certification
FAA-PMA
Price
Contact us for pricing
Availability
In Stock
Warranty
As per manufacturer
Request a Quote for AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision.

About the AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. for General Aviation

The General Aviation Valve, Intake (Part Number: AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision.) is a pneumatic systems used on the General Aviation. Manufactured by Airmotive Engineering Corp, this component supports bleed air distribution and pneumatic actuation and may be required during maintenance, repair, or scheduled overhaul cycles depending on service intervals and configuration.

Availability may vary across global suppliers and can typically be sourced in one or more of the following conditions:

  • New
  • Overhauled
  • Serviceable / As-Removed

Certification documentation such as FAA 8130-3 or EASA Form 1 may be available depending on supplier and condition.

Alternative and Cross-Reference Parts for AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. on General Aviation

The following parts from other manufacturers may serve as alternatives or cross-references for the AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. on the General Aviation. Verify interchangeability against the aircraft IPC and Type Certificate Data Sheet before procurement.

Part NumberDescriptionManufacturerCertification
AEL11900 (and oversizes up to .040”)General Aviation Seat, IntakeContinental Aerospace Technologies IncFAA-PMA
AEL61681 (and oversizes up to .040”)General Aviation Guide, Intake ValveContinental Aerospace Technologies IncFAA-PMA
AEL11901General Aviation Valve, IntakeContinental Aerospace Technologies IncFAA-PMA
AEL72057 (and oversizes up to .030”)General Aviation Seat, IntakeContinental Aerospace Technologies IncFAA-PMA
AEL11956 (and oversizes up to .040”)General Aviation Guide, IntakeContinental Aerospace Technologies IncFAA-PMA
AELSTD1196General Aviation Hose, Intake PipeContinental Motors IncFAA-PMA

Frequently Asked Questions about AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision.

Is AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. compatible with all General Aviation configurations?
Compatibility depends on aircraft serial number, modification status, and configuration. Verification against maintenance documentation is recommended prior to procurement.
Is AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. available new or overhauled?
Depending on availability, this component may be sourced new, overhauled, or serviceable with appropriate documentation.
Do you provide certification paperwork for AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision.?
Certification documentation such as FAA 8130-3 or EASA Form 1 may be available based on supplier inventory and condition.
How long does sourcing AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. take?
RFQ responses are typically returned within 12–24 hours depending on global supplier availability.
Do you ship AEL 12949 Drawing 852-1 Rev. 1 dated 10-4-88 or later FAA approved revision. internationally?
Yes. Global shipping and export coordination may be supported depending on supplier location and compliance requirements.

Related Pneumatic Systems Parts for General Aviation