1-530-711 - Rolls-Royce Face Seal for Rolls-Royce

1-530-711 is a rolls-royce face seal manufactured by Rexnord Industries, LLC for the Rolls-Royce. This general components part supports aircraft operation and maintenance requirements. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).

Part Number
1-530-711
Manufacturer
Rexnord Industries, LLC
Aircraft Model
Rolls-Royce
Category
General Components
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer
Request a Quote for 1-530-711

Aircraft Applicability for 1-530-711

1-530-711 (Rexnord Industries, LLC) is listed as applicable to the following Rolls-Royce family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • 250-C18
  • 250-C18A
  • 250-C18B
  • 250-C18C
  • 250-C20
  • 250-C20B
  • 250-C20C
  • 250-C20F
  • 250-C20J
  • 250-C20S

About the 1-530-711 for Rolls-Royce

The Rolls-Royce Face Seal (P/N 1-530-711) is a general components for the Rolls-Royce, manufactured by Rexnord Industries, LLC. This component supports aircraft operation and maintenance requirements. Documented applicability spans 10 Rolls-Royce configurations (250-C18, 250-C18A, 250-C18B, 250-C18C, and others). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.

Depending on supplier availability, 1-530-711 may be sourced in the following conditions, each released with its corresponding airworthiness documentation:

  • New / Factory New
  • Overhauled (OH)
  • Serviceable (SV) / As-Removed

FAA-PMA certification and EASA Form 1 dual release may be available for 1-530-711 subject to source and condition.

Frequently Asked Questions about 1-530-711

What aircraft does 1-530-711 fit?
1-530-711 is a general components associated with the Rolls-Royce, manufactured by Rexnord Industries, LLC. Documented applicability includes 250-C18, 250-C18A, 250-C18B, 250-C18C, 250-C20, 250-C20B, among others. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can 1-530-711 be supplied new, overhauled, or serviceable?
Subject to global supplier availability, 1-530-711 can typically be sourced new, overhauled, serviceable, or as-removed for the Rolls-Royce, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with 1-530-711?
1-530-711 can be supplied with FAA-PMA where available; EASA Form 1 dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can Rexnord Industries, LLC 1-530-711 be quoted for an AOG?
RFQs for 1-530-711 on the Rolls-Royce are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can 1-530-711 be exported internationally?
Yes. 1-530-711 can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing general components components and verifying certification.

Browse all aviation resources