3244871-8 - Pratt & Whitney Fuel Control-Mechanical for Pratt & Whitney

3244871-8 is a hydromechanical Fuel Control Unit (FCU) manufactured by Honeywell for Pratt & Whitney Canada turbine engines. The FCU is the engine's primary fuel-metering device: it schedules the precise fuel flow delivered to the combustion section as a function of power-lever angle, engine speed, compressor discharge pressure, and ambient conditions, governing starting, acceleration, deceleration, and steady-state running without electronic (FADEC) control.

Honeywell (legacy Bendix) supplies hydromechanical fuel controls for Pratt & Whitney Canada engines such as the widely-fielded PT6A turboprop family. The unit mounts on the engine accessory gearbox and contains precision valves, servos, and a flyweight governor; its calibration and rigging directly affect start behaviour, acceleration schedules, and fuel scheduling across the operating envelope (ATA 73 — Engine Fuel and Control). 3244871-8 is one of several related dash numbers in this fuel-control family (including -7 and -9); supersession and interchangeability among the dashes are governed by the engine IPC/CMM and must be confirmed before any substitution.

As a high-value engine rotable, 3244871-8 is typically sourced overhauled (OH) or serviceable (SV) with FAA 8130-3 / EASA Form 1 and, ideally, a bench-test/calibration record. Because the FCU governs fuel scheduling, calibrated test data and rigging information matter, and installation should follow the applicable engine CMM. New units are available through Honeywell / P&WC distribution on long lead.

Part Number
3244871-8
Manufacturer
Honeywell International Inc
Aircraft Model
Pratt & Whitney
Category
Fuel Systems
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer

Key Specifications for 3244871-8

ATA Chapter
73 — Engine Fuel and Control
Part Type
Hydromechanical Fuel Control Unit (FCU)
Engine
Pratt & Whitney Canada turbine (PT6A family — verify)
Manufacturer
Honeywell (legacy Bendix)
Control Type
Hydromechanical (non-FADEC)
Related Dashes
-7 / -8 / -9 — interchangeability per IPC/CMM
Typical Condition
Overhauled / Serviceable (rotable)

Procurement Notes for 3244871-8

Source OH/SV with 8130-3 / EASA Form 1 and a bench-test/calibration record; confirm the exact engine model and dash effectivity against the IPC/CMM. The -7/-8/-9 dashes and 3117178-10 may be related by supersession — verify before accepting a substitute. DER-repair and PMA acceptance for engine fuel controls varies by operator and authority — confirm acceptability. Lead-time data not verified — confirm at time of quote.

Request a Quote for 3244871-8

Aircraft Applicability for 3244871-8

3244871-8 (Honeywell International Inc) is listed as applicable to the following Pratt & Whitney family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • PW127
  • PW127E
  • PW127F
  • PW127M

Frequently Asked Questions about 3244871-8

What engine and aircraft use 3244871-8?
It is a fuel control for Pratt & Whitney Canada turbine engines — most commonly associated with the PT6A family that powers a wide range of turboprops. Confirm the exact engine model and dash effectivity against the engine IPC/CMM, as fuel controls are matched to specific engine models and ratings.
What condition codes are available for 3244871-8?
As an engine rotable it is offered Overhauled (OH), Serviceable (SV), or As-Removed (AR); New (NE) is generally OEM-only. OH/SV units should include a bench-test and calibration record, since the FCU must be calibrated and rigged for the engine.
What certification documents ship with 3244871-8?
FAA 8130-3 / EASA Form 1, ideally dual release. For an engine fuel control an airworthiness release is expected; a Certificate of Conformance alone is not normally sufficient for installation.
Are there interchangeable part numbers for 3244871-8?
No DLA FLIS / NSN cross-reference was identified. 3244871-8 belongs to a family with -7 and -9 dashes, and 3117178-10 has also been quoted as an alternate in brokerage records — treat all such dash relationships as IPC/CMM-governed and verify supersession/interchangeability before accepting a substitute.
Why is the FCU an overhaul-driven item?
Hydromechanical fuel controls are precision rotables that drift with wear and require periodic overhaul and recalibration. OH/SV units are the primary supply channel, new units carry long lead, and exchange/overhaul is the common model — always confirm the calibration/test record and rigging data.

Aviation Industry Guides

Reference resources for buyers sourcing fuel systems components and verifying certification.

Browse all aviation resources