540-0712-2 - GE Aviation Shutoff Valve for GE Aviation
540-0712-2 is a ge aviation shutoff valve manufactured by Honeywell International Inc. for the GE Aviation. This pneumatic systems part supports bleed air distribution and pneumatic actuation. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).
- Part Number
- 540-0712-2
- Manufacturer
- Honeywell International Inc.
- Aircraft Model
- GE Aviation
- Category
- Pneumatic Systems
- Conditions Available
- New / Overhauled / Serviceable / As-Removed — quoted per unit
- Certification
- FAA Form 8130-3 / EASA Form 1 available subject to source and condition
- Price
- Quoted per unit, condition, and trace documentation
- Availability
- Sourced on request — availability confirmed per RFQ, same-day response
- Warranty
- As per manufacturer
Aircraft Applicability for 540-0712-2
540-0712-2 (Honeywell International Inc.) is listed as applicable to the following GE Aviation family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.
- CF6-80C2A1|CF6-80C2A2|CF6-80C2A3|CF6-80C2A5|CF6-80C2A8|CF6-80C2B1|CF6-80C2B2|CF6-80C2B4|CF6-80C2B6|CF6-80C2B1F|CF6-80C2B2F|CF6-80C2B3F|CF6-80C2B4F|CF6-80C2B6F|CF6-80C2B1F1|CF6-80C2D1F|CF6-80C2A5F|CF6-80C2B7F|CF6-80C2B1F2|CF6-80C2B6FA|CF6-80C2B5F|CF6-80C2B8F
About the 540-0712-2 for GE Aviation
The GE Aviation Shutoff Valve (P/N 540-0712-2) is a pneumatic systems for the GE Aviation, manufactured by Honeywell International Inc.. This component supports bleed air distribution and pneumatic actuation. Documented applicability spans 1 GE Aviation configuration (CF6-80C2A1|CF6-80C2A2|CF6-80C2A3|CF6-80C2A5|CF6-80C2A8|CF6-80C2B1|CF6-80C2B2|CF6-80C2B4|CF6-80C2B6|CF6-80C2B1F|CF6-80C2B2F|CF6-80C2B3F|CF6-80C2B4F|CF6-80C2B6F|CF6-80C2B1F1|CF6-80C2D1F|CF6-80C2A5F|CF6-80C2B7F|CF6-80C2B1F2|CF6-80C2B6FA|CF6-80C2B5F|CF6-80C2B8F). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.
Depending on supplier availability, 540-0712-2 may be sourced in the following conditions, each released with its corresponding airworthiness documentation:
- New / Factory New
- Overhauled (OH)
- Serviceable (SV) / As-Removed
FAA-PMA certification and EASA Form 1 dual release may be available for 540-0712-2 subject to source and condition.
Frequently Asked Questions about 540-0712-2
What aircraft does 540-0712-2 fit?
Can 540-0712-2 be supplied new, overhauled, or serviceable?
What traceability and certification ships with 540-0712-2?
How quickly can Honeywell International Inc. 540-0712-2 be quoted for an AOG?
Can 540-0712-2 be exported internationally?
Aviation Industry Guides
Reference resources for buyers sourcing pneumatic systems components and verifying certification.
- How to Verify FAA 8130-3 Airworthiness Certification on Aircraft Parts — The FAA 8130-3 Airworthiness Approval Tag is the primary document certifying that an aircraft part meets FAA airworthiness standards and is approved for install...
- The Complete Guide to Aircraft Parts Sourcing in 2026 — Aircraft parts sourcing is the process of locating, evaluating, and procuring certified aviation components from OEMs, authorized distributors, MROs, and afterm...
- Understanding Aircraft Parts Condition Codes: A Complete Reference — Aircraft parts condition codes are standardized abbreviations defined by ATA Spec 2000 that describe the maintenance status and airworthiness of aviation compon...