J221P271WE - CFM International Packing Preformed for CFM International

J221P271WE is a cfm international packing preformed manufactured by Wencor LLC for the CFM International. This general components part supports aircraft operation and maintenance requirements. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).

Part Number
J221P271WE
Manufacturer
Wencor LLC
Aircraft Model
CFM International
Category
General Components
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer
Request a Quote for J221P271WE

Aircraft Applicability for J221P271WE

J221P271WE (Wencor LLC) is listed as applicable to the following CFM International family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • CFM56-2
  • CFM56-2A
  • CFM56-2B CFM56-2C1
  • CFM56-2C3
  • CFM56-2C5 & CFM56-2C6
  • CFM56-3
  • CFM56-3B & CFM56-3C
  • CFM56-5
  • CFM56-5-A1/F
  • CFM56-5A3

About the J221P271WE for CFM International

The CFM International Packing Preformed (P/N J221P271WE) is a general components for the CFM International, manufactured by Wencor LLC. This component supports aircraft operation and maintenance requirements. Documented applicability spans 10 CFM International configurations (CFM56-2, CFM56-2A, CFM56-2B CFM56-2C1, CFM56-2C3, and others). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.

Depending on supplier availability, J221P271WE may be sourced in the following conditions, each released with its corresponding airworthiness documentation:

  • New / Factory New
  • Overhauled (OH)
  • Serviceable (SV) / As-Removed

FAA-PMA certification and EASA Form 1 dual release may be available for J221P271WE subject to source and condition.

Frequently Asked Questions about J221P271WE

What aircraft does J221P271WE fit?
J221P271WE is a general components associated with the CFM International, manufactured by Wencor LLC. Documented applicability includes CFM56-2, CFM56-2A, CFM56-2B CFM56-2C1, CFM56-2C3, CFM56-2C5 & CFM56-2C6, CFM56-3, among others. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can J221P271WE be supplied new, overhauled, or serviceable?
Subject to global supplier availability, J221P271WE can typically be sourced new, overhauled, serviceable, or as-removed for the CFM International, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with J221P271WE?
J221P271WE can be supplied with FAA-PMA where available; EASA Form 1 dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can Wencor LLC J221P271WE be quoted for an AOG?
RFQs for J221P271WE on the CFM International are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can J221P271WE be exported internationally?
Yes. J221P271WE can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing general components components and verifying certification.

Browse all aviation resources