115E7150G1 - Boeing 777 Module Assy - Cabin Control Panel (Ccp) for Boeing 777

115E7150G1 is a boeing 777 module assy - cabin control panel (ccp) manufactured by BAE System Controls, Inc. for the Boeing 777. This structural components part supports the airframe's structural integrity and load-bearing capability. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).

Part Number
115E7150G1
Manufacturer
BAE System Controls, Inc.
Aircraft Model
Boeing 777
Category
Structural Components
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer
Request a Quote for 115E7150G1

Aircraft Applicability for 115E7150G1

115E7150G1 (BAE System Controls, Inc.) is listed as applicable to the following Boeing 777 family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • Boeing 777-300ER

About the 115E7150G1 for Boeing 777

The Boeing 777 Module Assy - Cabin Control Panel (Ccp) (P/N 115E7150G1) is a structural components for the Boeing 777, manufactured by BAE System Controls, Inc.. This component supports the airframe's structural integrity and load-bearing capability. Documented applicability spans 1 Boeing 777 configuration (Boeing 777-300ER). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.

Depending on supplier availability, 115E7150G1 may be sourced in the following conditions, each released with its corresponding airworthiness documentation:

  • New / Factory New
  • Overhauled (OH)
  • Serviceable (SV) / As-Removed

FAA Form 8130-3 or EASA Form 1 dual release may be available for 115E7150G1 subject to the source and condition of the specific unit.

Frequently Asked Questions about 115E7150G1

What aircraft does 115E7150G1 fit?
115E7150G1 is a structural components associated with the Boeing 777, manufactured by BAE System Controls, Inc.. Documented applicability includes Boeing 777-300ER. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can 115E7150G1 be supplied new, overhauled, or serviceable?
Subject to global supplier availability, 115E7150G1 can typically be sourced new, overhauled, serviceable, or as-removed for the Boeing 777, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with 115E7150G1?
115E7150G1 is supplied with the airworthiness documentation appropriate to its condition and source (FAA Form 8130-3 or EASA Form 1). Dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can BAE System Controls, Inc. 115E7150G1 be quoted for an AOG?
RFQs for 115E7150G1 on the Boeing 777 are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can 115E7150G1 be exported internationally?
Yes. 115E7150G1 can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing structural components components and verifying certification.

Browse all aviation resources