R5303M1 (10-61359-3) - Boeing 757 Speed Brake Actuator for Boeing 757

R5303M1 (10-61359-3) is a boeing 757 speed brake actuator manufactured by GE Aviation Systems LLC for the Boeing 757. This landing gear part supports ground operation, braking, and landing systems. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).

Part Number
R5303M1 (10-61359-3)
Manufacturer
GE Aviation Systems LLC
Aircraft Model
Boeing 757
Category
Landing Gear
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer
Request a Quote for R5303M1 (10-61359-3)

Aircraft Applicability for R5303M1 (10-61359-3)

R5303M1 (10-61359-3) (GE Aviation Systems LLC) is listed as applicable to the following Boeing 757 family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • Boeing 757-200 Series with STC ST01518SE installed.

About the R5303M1 (10-61359-3) for Boeing 757

The Boeing 757 Speed Brake Actuator (P/N R5303M1 (10-61359-3)) is a landing gear for the Boeing 757, manufactured by GE Aviation Systems LLC. This component supports ground operation, braking, and landing systems. Documented applicability spans 1 Boeing 757 configuration (Boeing 757-200 Series with STC ST01518SE installed.). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.

Depending on supplier availability, R5303M1 (10-61359-3) may be sourced in the following conditions, each released with its corresponding airworthiness documentation:

  • New / Factory New
  • Overhauled (OH)
  • Serviceable (SV) / As-Removed

FAA-PMA certification and EASA Form 1 dual release may be available for R5303M1 (10-61359-3) subject to source and condition.

Frequently Asked Questions about R5303M1 (10-61359-3)

What aircraft does R5303M1 (10-61359-3) fit?
R5303M1 (10-61359-3) is a landing gear associated with the Boeing 757, manufactured by GE Aviation Systems LLC. Documented applicability includes Boeing 757-200 Series with STC ST01518SE installed.. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can R5303M1 (10-61359-3) be supplied new, overhauled, or serviceable?
Subject to global supplier availability, R5303M1 (10-61359-3) can typically be sourced new, overhauled, serviceable, or as-removed for the Boeing 757, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with R5303M1 (10-61359-3)?
R5303M1 (10-61359-3) can be supplied with FAA-PMA where available; EASA Form 1 dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can GE Aviation Systems LLC R5303M1 (10-61359-3) be quoted for an AOG?
RFQs for R5303M1 (10-61359-3) on the Boeing 757 are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can R5303M1 (10-61359-3) be exported internationally?
Yes. R5303M1 (10-61359-3) can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing landing gear components and verifying certification.

Browse all aviation resources