8TJ124GGN3 - Boeing 747 Fuel Flow Xmitter for Boeing 747

8TJ124GGN3 is a boeing 747 fuel flow xmitter manufactured by Ametek Aerospace and Defense, A Division of AMETEK Inc. for the Boeing 747. This general components part supports aircraft operation and maintenance requirements. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).

Part Number
8TJ124GGN3
Manufacturer
Ametek Aerospace and Defense, A Division of AMETEK Inc.
Aircraft Model
Boeing 747
Category
General Components
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer
Request a Quote for 8TJ124GGN3

Aircraft Applicability for 8TJ124GGN3

8TJ124GGN3 (Ametek Aerospace and Defense, A Division of AMETEK Inc.) is listed as applicable to the following Boeing 747 family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • Boeing 747
  • Boeing 767-200
  • Boeing -300

About the 8TJ124GGN3 for Boeing 747

The Boeing 747 Fuel Flow Xmitter (P/N 8TJ124GGN3) is a general components for the Boeing 747, manufactured by Ametek Aerospace and Defense, A Division of AMETEK Inc.. This component supports aircraft operation and maintenance requirements. Documented applicability spans 3 Boeing 747 configurations (Boeing 747, Boeing 767-200, Boeing -300). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.

Depending on supplier availability, 8TJ124GGN3 may be sourced in the following conditions, each released with its corresponding airworthiness documentation:

  • New / Factory New
  • Overhauled (OH)
  • Serviceable (SV) / As-Removed

FAA Form 8130-3 or EASA Form 1 dual release may be available for 8TJ124GGN3 subject to the source and condition of the specific unit.

Frequently Asked Questions about 8TJ124GGN3

What aircraft does 8TJ124GGN3 fit?
8TJ124GGN3 is a general components associated with the Boeing 747, manufactured by Ametek Aerospace and Defense, A Division of AMETEK Inc.. Documented applicability includes Boeing 747, Boeing 767-200, Boeing -300. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can 8TJ124GGN3 be supplied new, overhauled, or serviceable?
Subject to global supplier availability, 8TJ124GGN3 can typically be sourced new, overhauled, serviceable, or as-removed for the Boeing 747, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with 8TJ124GGN3?
8TJ124GGN3 is supplied with the airworthiness documentation appropriate to its condition and source (FAA Form 8130-3 or EASA Form 1). Dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can Ametek Aerospace and Defense, A Division of AMETEK Inc. 8TJ124GGN3 be quoted for an AOG?
RFQs for 8TJ124GGN3 on the Boeing 747 are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can 8TJ124GGN3 be exported internationally?
Yes. 8TJ124GGN3 can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing general components components and verifying certification.

Browse all aviation resources