6355D0001-01 - Boeing 737 Motor Assembly, Stabilizer Trim for Boeing 737

6355D0001-01 is a stabilizer trim motor assembly supplied by Eaton Aerospace for the Boeing 737. The motor drives the horizontal stabilizer trim system (ATA 27 — Flight Controls / pitch trim), providing the powered input that positions the horizontal stabilizer to trim the aircraft in pitch in response to autopilot and manual trim commands.

Horizontal stabilizer trim is a flight-critical function, and its drive hardware is closely controlled by configuration. The specific 737 variant (Classic 300/400/500 vs NG 600/700/800/900) and dash effectivity should be confirmed against the Boeing 737 IPC, along with the applicable mod/service-bulletin status. As a rotable it is bench-testable against the applicable CMM and functional-tested on installation.

6355D0001-01 is typically sourced overhauled (OH) or serviceable (SV) with FAA 8130-3 / EASA Form 1; new units are available through Boeing distribution. Confirm variant effectivity and configuration before procurement.

Part Number
6355D0001-01
Manufacturer
Eaton Aerospace LLC
Aircraft Model
Boeing 737
Category
Flight Controls
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer

Key Specifications for 6355D0001-01

ATA Chapter
27 — Flight Controls (stabilizer trim)
Part Type
Stabilizer trim motor assembly
Aircraft
Boeing 737 (Classic/NG — verify effectivity)
Manufacturer
Eaton Aerospace LLC
Typical Condition
Overhauled / Serviceable (rotable)

Procurement Notes for 6355D0001-01

Source OH/SV with 8130-3 / EASA Form 1 and a functional-test record; confirm 737 variant, dash effectivity, and mod/SB status against the IPC. No NSN/PMA cross-reference identified. Lead-time data not verified — confirm at quote.

Request a Quote for 6355D0001-01

Aircraft Applicability for 6355D0001-01

6355D0001-01 (Eaton Aerospace LLC) is listed as applicable to the following Boeing 737 family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • Boeing 737-8
  • Boeing 737-9

Frequently Asked Questions about 6355D0001-01

What aircraft does 6355D0001-01 fit?
6355D0001-01 is a flight controls associated with the Boeing 737, manufactured by Eaton Aerospace LLC. Documented applicability includes Boeing 737-8, Boeing 737-9. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can 6355D0001-01 be supplied new, overhauled, or serviceable?
Subject to global supplier availability, 6355D0001-01 can typically be sourced new, overhauled, serviceable, or as-removed for the Boeing 737, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with 6355D0001-01?
6355D0001-01 can be supplied with FAA-PMA where available; EASA Form 1 dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can Eaton Aerospace LLC 6355D0001-01 be quoted for an AOG?
RFQs for 6355D0001-01 on the Boeing 737 are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can 6355D0001-01 be exported internationally?
Yes. 6355D0001-01 can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing flight controls components and verifying certification.

Browse all aviation resources