HA2437-7 - Boeing 737 Beam Latch Assembly for Boeing 737

HA2437-7 is a boeing 737 beam latch assembly manufactured by Hartwell Corporation for the Boeing 737. This structural components part supports the airframe's structural integrity and load-bearing capability. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).

Part Number
HA2437-7
Manufacturer
Hartwell Corporation
Aircraft Model
Boeing 737
Category
Structural Components
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer
Request a Quote for HA2437-7

Aircraft Applicability for HA2437-7

HA2437-7 (Hartwell Corporation) is listed as applicable to the following Boeing 737 family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • Boeing 737-8|737-9|737-8200

About the HA2437-7 for Boeing 737

The Boeing 737 Beam Latch Assembly (P/N HA2437-7) is a structural components for the Boeing 737, manufactured by Hartwell Corporation. This component supports the airframe's structural integrity and load-bearing capability. Documented applicability spans 1 Boeing 737 configuration (Boeing 737-8|737-9|737-8200). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.

Depending on supplier availability, HA2437-7 may be sourced in the following conditions, each released with its corresponding airworthiness documentation:

  • New / Factory New
  • Overhauled (OH)
  • Serviceable (SV) / As-Removed

FAA-PMA certification and EASA Form 1 dual release may be available for HA2437-7 subject to source and condition.

Frequently Asked Questions about HA2437-7

What aircraft does HA2437-7 fit?
HA2437-7 is a structural components associated with the Boeing 737, manufactured by Hartwell Corporation. Documented applicability includes Boeing 737-8|737-9|737-8200. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can HA2437-7 be supplied new, overhauled, or serviceable?
Subject to global supplier availability, HA2437-7 can typically be sourced new, overhauled, serviceable, or as-removed for the Boeing 737, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with HA2437-7?
HA2437-7 can be supplied with FAA-PMA where available; EASA Form 1 dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can Hartwell Corporation HA2437-7 be quoted for an AOG?
RFQs for HA2437-7 on the Boeing 737 are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can HA2437-7 be exported internationally?
Yes. HA2437-7 can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing structural components components and verifying certification.

Browse all aviation resources