P/N 1380204-1 - Airbus A380 Valve, Flow Control for Airbus A380

P/N 1380204-1 is a airbus a380 valve, flow control manufactured by United Technologies, Hamilton Sundstrand for the Airbus A380. This pneumatic systems part supports bleed air distribution and pneumatic actuation. Units are sourced through a vetted supplier network and released with the airworthiness documentation appropriate to their condition and source (FAA Form 8130-3 / EASA Form 1 where applicable).

Part Number
P/N 1380204-1
Manufacturer
United Technologies, Hamilton Sundstrand
Aircraft Model
Airbus A380
Category
Pneumatic Systems
Conditions Available
New / Overhauled / Serviceable / As-Removed — quoted per unit
Certification
FAA Form 8130-3 / EASA Form 1 available subject to source and condition
Price
Quoted per unit, condition, and trace documentation
Availability
Sourced on request — availability confirmed per RFQ, same-day response
Warranty
As per manufacturer
Request a Quote for P/N 1380204-1

Aircraft Applicability for P/N 1380204-1

P/N 1380204-1 (United Technologies, Hamilton Sundstrand) is listed as applicable to the following Airbus A380 family variants. Confirm eligibility against the aircraft IPC / Type Certificate Data Sheet for the specific tail and configuration.

  • Airbus A380-841
  • Airbus A380-842

About the P/N 1380204-1 for Airbus A380

The Airbus A380 Valve, Flow Control (P/N P/N 1380204-1) is a pneumatic systems for the Airbus A380, manufactured by United Technologies, Hamilton Sundstrand. This component supports bleed air distribution and pneumatic actuation. Documented applicability spans 2 Airbus A380 configurations (Airbus A380-841, Airbus A380-842). It is typically procured during line maintenance, scheduled overhaul, or AOG recovery depending on service intervals and configuration.

Depending on supplier availability, P/N 1380204-1 may be sourced in the following conditions, each released with its corresponding airworthiness documentation:

  • New / Factory New
  • Overhauled (OH)
  • Serviceable (SV) / As-Removed

FAA Form 8130-3 or EASA Form 1 dual release may be available for P/N 1380204-1 subject to the source and condition of the specific unit.

Frequently Asked Questions about P/N 1380204-1

What aircraft does P/N 1380204-1 fit?
P/N 1380204-1 is a pneumatic systems associated with the Airbus A380, manufactured by United Technologies, Hamilton Sundstrand. Documented applicability includes Airbus A380-841, Airbus A380-842. Eligibility for a specific tail still depends on serial number and modification status — verify against the aircraft IPC and Type Certificate Data Sheet.
Can P/N 1380204-1 be supplied new, overhauled, or serviceable?
Subject to global supplier availability, P/N 1380204-1 can typically be sourced new, overhauled, serviceable, or as-removed for the Airbus A380, each with the airworthiness documentation appropriate to that condition.
What traceability and certification ships with P/N 1380204-1?
P/N 1380204-1 is supplied with the airworthiness documentation appropriate to its condition and source (FAA Form 8130-3 or EASA Form 1). Dual release and back-to-birth or teardown traceability may also be available depending on the source and condition of the specific unit.
How quickly can United Technologies, Hamilton Sundstrand P/N 1380204-1 be quoted for an AOG?
RFQs for P/N 1380204-1 on the Airbus A380 are typically answered within 12-24 hours. AOG requirements are prioritized and sourced through the global supplier network on an expedited basis.
Can P/N 1380204-1 be exported internationally?
Yes. P/N 1380204-1 can be shipped worldwide subject to ITAR/EAR screening and destination-country import compliance; export and customs documentation is coordinated per shipment.

Aviation Industry Guides

Reference resources for buyers sourcing pneumatic systems components and verifying certification.

Browse all aviation resources